Membrane chemicals like Minncare cold sterilant for membrane systems are available from Evoqua. MINNCARE® is considered the gold standard in water system sanitization against short and long-term bacterial problems. MINNCARE Cold Sterilant has been used in water system sanitization for over 25 years, testimony to it’s superior performance and reliability. MINNCARE is effective in sanitizing RO water treat-ment systems and is capable of providing a 6 log reduction of bacteria population at a 100X dilution (1%) within a 36 minute soak time. MINNCARE stops organism growth by oxidizing microbial cell proteins and enzyme systems. MINNCARE Cold Sterilant sanitizes without toxic aldehyde vapors. Peracetic acid is also safe for use with thin-film composite membranes. MINNCARE is biodegradable and will decompose into oxygen, water and acetic acid. It poses no threat to municipal waste treatment plants.
Minncare 1% Test Strips verify adequate concentration of a 1% Minncare solution during sanitization of your high purity water system. These convenient dip-and-read strips can be used at any test port in your system to provide an accurate pass/fail measurement of Minncare solution.
Minncare Cold Sterilant, 90 mL Bottle; is a peracetic acid solution developed for use on reverse osmosis (RO) membranes and their associated distribution systems.
Minncare Cold Sterilant, 1 Gallon Bottle; is a peracetic acid solution developed for use on reverse osmosis (RO) membranes and their associated distribution systems.
Minncare Cold Sterilant, 90 mL Bottles (Case of 6); is a peracetic acid solution developed for use on reverse osmosis (RO) membranes and their associated distribution systems.
Minncare Cold Sterilant, 1 Quart Bottle; is a peracetic acid solution developed for use on reverse osmosis (RO) membranes and their associated distribution systems.
Minncare Residual Test Strips are easy to use and conveniently packaged 100 test strips per container. Each strip has a "reaction zone" pad located at one end of the strip. When stored and used properly, the test strip pad can indicate residual Minncare levels as low as 1 part per million (ppm). The reaction zones are set to provide six different reading levels at 100, 30, 10, 3, 1 and 0 (zero) parts per million.
RoCide® DB20 is a concentrated, fast-acting, non-oxidizing liquid biocide for intermittent use that provides instant antimicrobial activity. It is based on a 20% solution of the active ingredient dibromo nitrilopropionamide (DBNPA).
RoCide® IS2 liquid is a broad spectrum, non-oxidizing biocide intended for continuous injection and specifically formulated for reverse osmosis (RO) feedwaters. It is based on a 1.5% isothiazolin mixture. This slow-acting biocide is powerful against microbiological contaminants commonly found in RO applications including bacteria, fungi and algae.
