Accessories and components for Hach, Thornton and Mettler Toledo Thornton in line water quality meters.
Free Chlorine Reagent Set (includes DPD Indicator, and Free Chlorine Indicator and Buffer Solutions). Used with the CL17 analyzer and bulk analytical methods. *This product has not been evaluated to test for chlorine and chloramines in medical applications in the United States.
Indicator solution for the Hach SP510 Hardness monitor. Replenish every two months for continuous operation.
Total Chlorine Reagent Set (includes DPD Indicator, and Total Chlorine Indicator and Buffer Solutions). Used with the CL17 Analyzer and bulk analytical methods. *This product has not been evaluated to test for chlorine and chloramines in medical applications in the United States.
Hardness buffer solution for HACH SP510, 0. 5l, 0. 3,1,2,5 mg/l
This shield is a complete solution to protect the SC200 controller from weather and sun. The transparent door can be opened for operating the controller; the outside case is opaque to prevent color fading of the controller case. It is UV absorbent and protects the display and membrane keypad from deterioration due to UV exposure. However, the cover will become yellowish over time and is available as a replacement part (9221700).
Mettler Toledo's Inlet Filter for 5000TOC Analyzer is a high capacity filter element. Model Number: Thornton 58091551.
Mettler Toledo's VP patch cables are used for connections between sensors and M300 instruments. VP cables are for VP style sensors only.
Mettler Toledo's VP patch cables are used for connections between sensors and M300 instruments. VP cables are for VP style sensors only.
Mettler Toledo's standard patch cables are used for connections between sensors and M300 instruments.
Mettler Toledo's VP patch cables are used for connections between sensors and M300 instruments. VP cables are for VP style sensors only.
Wall mounting kit for 1/2 DIN M300 Transmitters, MT 30300482
Mettler Toledo's VP patch cables are used for connections between sensors and M300 instruments. VP cables are for VP style sensors only.
Mettler Toledo's standard patch cables are used for connections between sensors and M300 instruments.
Smart Sensor Patch Cable, 25FT, Thornton 58080004 (1025-79)
Mettler Toledo's UV lamp kit, used as a replacement for the 5000TOCi sensor. UV lamp's recommended replacement every 4,500 hours of operation.
Myron L CS-11 plug-in module is used to calibrate Myron L 750 series Resistivity monitors/controllers. The CS-11 offers 20 megohms of resistivity.
Myron L RPG replacement sensors are easy to replace in your instrument. This pH sensor is compatible with the Myron L TechPro TpH1 and TH1 meters.
Myron L replacement sensors are easy to install in your instrument. This pH sensor is compatible with the Myron L Meter models including: AG6/pH, EP11/pH, M6/pH, T2/pH.
Myron L RPR replacement sensors are easy to replace in your instrument. The pH/ORP sensor is compatible with the Myron L UltraMeter II.
Myron L 024-1 solenoid valve is designed to be corrosion-resistant with flow control and manual override. The valve also features anti-hammer closing and conduit connector in addition to adjustable flow control.
Myron L SMP50 surface mounting plate is a small mounting plate that attaches to the back of a MyronL inline monitor/controller. The SMP50 is designed to make it easy to mount the 750 Series Meter to the wall.
The Flow Sensor module for the sc200 is a user installed module that allows connection of flow meters to the controller. This module will work with analog flow sensors and is specifically built to be used with the flow paddle wheel sensor and the ultrasonic flow sensor. See manual for additional connection information.
Calibration Verification Kit for CL17 online Chlorine Analyzer.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA® l applications in the United States.
DPD is an indicator that is used to measure either Free Chlorine or Total Chlorine with the CL17 Analyzer. Depending upon whether Free Chlorine or Total Chlorine is being measured, the DPD indicator is added to Free Chlorine (2314011) or Total Chlorine (2263411) Indicator Solution, and used with Free (231411) or Total (2263511) Buffer Solution by the CL17 Analyzer.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA®l applications in the United States.
CL17 Free Chlorine Buffer Solution. Use with Free Chlorine Indicator Solution (2314011) and DPD Compound (2297255) for testing Free Chlorine using the CL17 Analyzer or bulk analytical methods.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA®l applications in the United States.
CL17 Free Chlorine Indicator Solution. Use with Free Chlorine Buffer Solution (2314111) and DPD Compound (2297255) for testing Free Chlorine using the CL17 Analyzer or bulk analytical methods.
*This product has not been evaluated to test for chlorine and chloramines in MEDICA®l applications in the United States.
General Purpose Inline Process ORP Sensor with Integrated Digital Electronics for "Plug and Play" with Hach sc Digital Controllers - Platinum ORP Electrode, PEEK Housing, Convertible Mount, 10m Cable.
Flow Meter with Valve, 20 to 300 mL/minute. 1/4" Outside Diameter tubing.
Hach's GLI Digital Gateway is designed to convert analog differential pH/ORP sensors to digital output, for connecting to sc digital controller. This field-proven technique uses three electrodes instead of the two normally used in conventional pH sensors. Process and reference electrodes measure the pH differentially with respect to a third ground electrode. The end result is unsurpassed measurement.
Hach's Inductive Conductivity Digital Gateway is designed to convert pHD Analog Sensors to digital output, for connecting to sc100 digital controller (used directly at the end of the analog sensor cable without extensions).
Installation kit includes: pressure regulator (4 psi), Y-strainer, Torx drivers (T20, T25), stir bar, tubing, screws, connectors, sample valve, grounding kit, cables, bags, labels, plastic funnel.
Magnesium Sulfate Standard, 29mL, for calcium titration and Hardness Monitor, 10,000 mg/L as CaCO3, for SP510 Hardness monitor - for checking hardness monitor response.
Maintenance Kit (for instruments sold after March 2000). Contains reagent tubing (not pictured), reagent caps and fittings to be replaced annually. Pump module tubing to be replaced at three to six-month intervals.
NOTE: for instruments purchased before April 2000, order PN 4721600.
Maintenance Kit (for instruments sold after March 2000). Contains pre-assembled reagent tubing, reagent caps and fittings to be replaced annually. Pump module tubing to be replaced at three to six-month intervals.
NOTE: for instruments purchased before April 2000, order PN 4721600.
Maintenance Kit for Hach SP 510 Hardness Monitor
Power cord kit with strain relief (125 VAC) for use with the SC100 controller, Cl17, and MO42 analyzers. Cable is 6 ft (1.83 m) in length.
When additional communications configurability is needed for process control, the 4-20mA output module can be added into the controller to include three additional analog outputs. This module connects to the network card on the inside of the sc200.
Hach's PC/RC Combination Digital Gateway is designed to convert PC/RC analog pH sensors to digital output, for connecting to sc digital controller. These combination sensors are designed for specialty applications for immersion or in-line mounting. The reference cell features a double junction design for extended service life, and a built-in solution ground.
The Profibus DP communication module for the sc200 is a user installed module that allows for communication via Profibus from the controller. See manual for additional connection information.
Reagent 1 for 5500sc Silica Analyzer, 2L bottle, Hach 6774802.
NOTE: items in this set are considered hazardous and shipping methods may be limited.
Reagent 2 for 5500sc Silica Analyzer, 2L bottle, Hach 6774902.
NOTE: items in this set are considered hazardous and shipping methods may be limited.
Complete set of reagents and standards for the 5500sc Silica analyzer.
NOTE: items in this set are considered hazardous and shipping methods may be limited.
Full set of parts required to install the SP510 Analyzer.
Sample conditioning kit in stainless steel for 5500sc analyzers. To be used instead of the provided plastic sample conditioning kit.
Standard 1 for 5500sc Silica Analyzer, 2L bottle, Hach 6775002.
Myron L CS-14 module is used to calibrate Myron L 750 series resistivity monitors/controllers. The CS-14 offers 2 megohms of resistivity. Myron L NIST traceable. Calibration Modules are commonly used to verify and calibrate Resistivity Monitor/controllers.
Replacement Tips for Myron L M'PET, Bag of 48, Myron L PTIP100-4
