Hydranautics Seawater RO Membrane SWC6-LD
Material: W2T822709 Unit of Measure #: EA See All 8" Seawater MembranesHydranautics SWC seawater desalination membranes are high productivity elements offering the highest levels of salt rejection and a consistently pure end product.
- 0 is the minimum order quantity for this product. Please check quantity and add to cart again.
- Model: SWC6-LD
- Length: 40"
- Diameter: 8"
- Weight: 33 lbs
- Membrane Type: Thin Film Composite
- Active Membrane Area: 400 ft2
- Feed Spacer: 34 mil
- Permeate Flow Rate: 6000 GPD - 12,000 GPD
- Applied Pressure: 600 PSI - 800 PSI
- Maximum Pressure: 1200 PSI
- Stabilized Salt Rejection: 99.6% - 99.8%
- Typical Boron Rejection: 83.0% - 91.0%
- SWC6-LD.pdf 71.4 KB
- All Documentation
Hydranautics SWC seawater desalination membranes are high productivity elements offering the highest levels of salt rejection and a consistently pure end product.
- Model: SWC6-LD
- Length: 40"
- Diameter: 8"
- Weight: 33 lbs
- Membrane Type: Thin Film Composite
- Active Membrane Area: 400 ft2
- Feed Spacer: 34 mil
- Permeate Flow Rate: 6000 GPD - 12,000 GPD
- Applied Pressure: 600 PSI - 800 PSI
- Maximum Pressure: 1200 PSI
- Stabilized Salt Rejection: 99.6% - 99.8%
- Typical Boron Rejection: 83.0% - 91.0%
- SWC6-LD.pdf 71.4 KB
- All Documentation
Description
Membrane Formulations are designed to accommodate varying levels of seawater salinities worldwide with reliable field-proven performance. The SWC6-LD offers the same performance as the SWC6 with additional low fouling characteristics and superior salt and boron rejection with low operating pressures. SWC6-LD membranes feature Hydranautics LD Technology - high performance RO technology that helps reduce fouling from colloidal particles and biological growth. LD Technology uses proprietary feed spacers to reduce bio-growth (NSF 61 approved for drinking water). This innovative feed spacer design prevents trapping of small colloidal particles and improves the effectiveness of cleanings.
Product Information
Legacy Part Number
SWC6-LDSpecifications
- Maximum Operating Temperature: 113F (45C)
- Maximum Feed Flow Rate: 75 GPM
- Chlorine Tolerance: 0.1 PPM
- pH Range, Continuous Operation: 2-11
- Maximum Feed Water Turbidity (NTU): 1
- Maximum Feed Water Silt Density Index (SDI): 5
- Maximum Pressure Drop For Each Element: 10 psi
Specs
- HYDRANAUTICS
- Seawater
- 8"
- RO
Documentation
- SWC6-LD.pdf71.4 KB