Evoqua United States - Canada - EN

Suez AK Low Pressure RO Membrane AK4040TM

Material: W2T556080 Unit of Measure #: EA See All <4" Low Pressure Membranes
A-Series proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AK HR low pressure brackish elements are selected when high rejection and low operating pressures are desired. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psig (689 kPa).
List Price
${{finalPrice | intlNumber('en-EN','USD')}}
  • 0 is the minimum order quantity for this product. Please check quantity and add to cart again.
-
+

Discontinued product
evoqa
A-Series proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AK HR low pressure brackish elements are selected when high rejection and low operating pressures are desired. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psig (689 kPa).
List Price
${{finalPrice | intlNumber('en-EN','USD')}}
-
+
Discontinued product

Description

Length: 40" Diameter: 4" Weight: 8 lbs Active Membrane: 85 ft2 Membrane Type: Thin Film Composite Outer Shell: Fiberglass-wrapped Operating Pressure: 100 PSI Maximum Pressure: 400 PSI Permeate Flow Rate: 2200 GPD Nominal Salt Rejection: 99. 0%

Product Information

Legacy Part Number

AK4040TM

Specifications

Maximum Operating Temperature: 122F (50C) Chlorine Tolerance: 1000 PPM pH Range, Continuous Operation: 4-11 pH Range, Short Term Cleaning (30min): 1-12 Maximum Feed Water Turbidity (NTU): 1 Maximum Feed Water Silt Density Index (SDI): 5

Documentation