Hydranautics ESPA2-LD MAX Element
Material: W2T862952 Unit of Measure #: EA See All 8" Brackish MembranesHydranautics ESPA2-LD-MAX membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. ESPA2 membranes offer highest energy efficiency at lowest costs and are used in large municipal wastewater reclamation plants.
- 0 is the minimum order quantity for this product. Please check quantity and add to cart again.
Hydranautics ESPA2-LD-MAX membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. ESPA2 membranes offer highest energy efficiency at lowest costs and are used in large municipal wastewater reclamation plants.
Description
- Model Name: ESPA2-LD MAX
- Length: 40"
- Diameter: 8"
- Feed Spacer: 28 mil
- Active Membrane: 440 ft²
- Membrane Type: Composite Polyamide
- Operating Pressure: 150 PSI
- Maximum Pressure: 600 PSI
- Permeate Flow Rate: 12,000 GPD
- Nominal Salt Rejection: 99.6%
Product Information
Key Applications
ESPA-LD-MAX membranes are used in the treatment of drinking water, industrial process waters, municipal and industrial waste water recovery and reuse because of this exception performance capability. These membranes also serve as part of polishing units in seawater desalination plants when boron rejection is critical.
Specifications
- Maximum Operating Temperature: 113F (45C)
- Chlorine Tolerance: < 0.1 PPM
- pH Range, Continuous Operation: 2-10.6
- pH Range, Short Term Cleaning (30min): 1-12
- Maximum Feed Water Turbidity (NTU): 1
- Maximum Feed Water Silt Density Index (SDI): 5
- Maximum Pressure Drop For Each Element: 15 psi
- Maximum Feed Flow: 85 GPM
Manufacturer's Part Number
ESPA2-LD MAX
Documentation
- ESPA2-LD-MAX.pdf71 KB