Evoqua ZHFF Series filter housings are constructed of 304 stainless steel and models are available to accommodate five Code F style cartridges in 10"", 20"", 30"", or 40"" lengths. ZHFF housings can also be configured to use Code 0 or Code 5 cartridges. Cartridges are independently sealed inside the housing and a single V-band clamp closure allows for easy cartridge replacement. Flange inlet and outlet connections are available as an option for the standard NPT.
Evoqua ZHGA Series housings are constructed of 304SS and accommodate six Code F filters in 10"", 20"", 30"", or 40"" lengths. A swing bolt closure allows for quick disassembly for cleaning and service. An air vent plug on the cover allows for venting before startup.
This multi-tube Filter housing is made of durable 304 stainless steel and is suited For general purpose industrial and commercial filtration. These housings can accommodate Code F (DOE, internals provided) and can be configured For Code 0 and Code 5 Cartridge. Incorporates a flow baffle which deflects incoming flow to prevent Cartridge erosional 1/4" NPT air vent on the cover allows venting before start up A 3/4" NPT drain plug allows For liquid removal Cartridge are independently sealed inside the housing and a single V-band Clamp housing closure allows easy Cartridge replacement Cartridge post can be lifted out, allowing easy removal of Cartridge at the bottom of the stack Qty of Cartridge Accepted: 5 or 7Length of Cartridge Accepted: 20"Liquid Flow Rate* (GPM): 50 (5 round) / 70 (7 round)Fitting Size: 1. 5" NPTM or 1. 5" Flange Dimension A (5 round): 32. 5"Dimension B (5 round): 6-3/4"Dimension C (5 round): 2-7/8"Dimension D (5 round): 12"Dimension E (For flange): 12-7/8*Liquid flow rate can vary with Cartridge type selected.
This multi-tube Cartridge Filter housing is made of 18 gauge 304 stainless steel. Housings are available to accommodate 10, 20 30 or 40 inch long code F Filters (double open end). The inlet and outlet are available in 2" NPT or 2" Flanges. There is a 1/2" NPT drain plug and a 1/4" NPT vent at the top of the housing. A swing bolt closure allows For quick disassembly For cleaning or service. This Cartridge Filter housing is ideal For a wide variety of high flow applications that require an economical, high quality housing. Uses 304 or 316 stainless steel construction For maximum corrosion resistance to deliver years of dependable service Air vent plug on the cover allows For venting before start up This housing accommodates liquid flow rates up to 60GPM (227LPM) with operating pressures up to 150 psig (10. 3 bar)Choice of 2" NPT or Flange Connections Ethylene Propylene O-Ring Housing Dimensions in Inches (cm) A - 34 (86) B - 11. 2 (28) C - 5. 2 (13) D - 10. 2 (26) E (Optional Flange) - 15 (38)
Global Filter Multi-Round Cartridge Vessels are designed for industrial and high purity applications.
This multi-tube cartridge filter housing is made of 18 gauge 304 stainless steel. Housings are available to accommodate 10, 20 30 or 40 inch long code F filters (double open end).
This multi-tube filter housing is made of durable 304 stainless steel and is suited for general purpose industrial and commercial filtration. These housings can accommodate Code F (DOE, internals provided) and can be configured for Code 0 and Code 5 cartridges.
This multi-tube filter housing is made of durable 304 stainless steel and is suited for general purpose industrial and commercial filtration. These housings can accommodate Code F (DOE, internals provided) and can be configured for Code 0 and Code 5 cartridges.
This multi-tube cartridge filter housing is made of 18 gauge 316 stainless steel. Housings are available to accommodate 10, 20 30 or 40 inch long code F filters (double open end). There is a 1/2" NPT drain plug and a 1/4" NPT vent at the top of the housing. A swing bolt closure allows for quick disassembly for cleaning or service. This cartridge filter housing is ideal for a wide variety of high flow applications that require an economical, high quality housing.
This multi-tube cartridge filter housing is made of 18 gauge 304 stainless steel. Housings are available to accommodate 10, 20 30 or 40 inch long code F filters (double open end). The inlet and outlet are available in 2" NPT or 2" Flanges. There is a 1/2" NPT drain plug and a 1/4" NPT vent at the top of the housing. A swing bolt closure allows for quick disassembly for cleaning or service. This cartridge filter housing is ideal for a wide variety of high flow applications that require an economical, high quality housing.
This multi-tube housing is made of electropolished 316L stainless steel. This housing accommodates 7 cartridges in 20" lengths, either code 0 (SOE, 2-2-2 O-ring, flat closed end), or code 5 (SOE, 2-2-2 O- ring, spear closed end). The bottom of each housing is fitted with a 3/4" NPTF drain plug and the top of each housing is equipped with a NPTF vent. A V-band clamp closure allows cartridges to be changed quickly and easily.
This multi-tube housing is made of electropolished 316L stainless steel. This housing accommodates 7 cartridges in 30" lengths, either code 0 (SOE, 2-2-2 O-ring, flat closed end), or code 5 (SOE, 2-2-2 O- ring, spear closed end). The bottom of each housing is fitted with a 3/4" NPTF drain plug and the top of each housing is equipped with a NPTF vent. A V-band clamp closure allows cartridges to be changed quickly and easily.
