{{Error}}

Skip Navigation LinksEvoqua Water Technologies > en > Brands > Lab > Evoqua LaboStar® Products

 Contact Us

North, East and Middle Europe

​Dmitrij Materi

Dmitrij.Materi@evoqua.com

Tel.        ​+49 40 670 868-23

Mobile   +49 172 410 5848

 

Germany

Lydia Kühne

Lydia.Kuehne@evoqua.com​

Tel.        +49 40 670 868-517
 

Africa, South, South East and
Western Europe, Middle East 

Chaker Bettaieb

Chaker.Bettaieb@evoqua.com​​​

Tel.        +49 40 670 868-548

Mobile   +49 172 549 8520​

South and Central America

Raphael Lima

Evoqua@samerica.com​​​

Tel.        +49 40 670 868-548

Mobile   +49 172 549 8520​

South Asia / ASEAN / Far East of
Asia, New Zealand, Australia

Rohit Singh

Regional Manager - Asia

Singh.Rohit@evoqua.com​​

Tel.        +65 65 559 2568

Mobile   +65 9151 7081​


Evoqua LaboStar® Products

Highest Water Quality

The LaboStar® system is a cost effective means of producing analytical grade water. This extremely compact ultrapure water system can be used on a laboratory bench. The water produced by the system has a conductivity of 0.055 µS/cm (equivalent to 18.2 MΩ-cm) and a TOC value of < 10 ppb. The water produced by the ultraviolet (UV) version has a TOC value of 1 – 5 ppb.

This water quality exceeds all relevant standards including ASTM Type I, CLSI (Clinical Laboratory Standards Institute) and ISO 3696 Type I.

The LaboStar system is fed with either deionized water, distilled water or permeate from a reverse osmosis unit. The selection of treatment materials in LaboStar 2 and 4 systems, along with the DI polishing modules, guarantees that the product water meets the highest quality standards. A conductivity meter in the recirculation section continually monitors the purity of the product water. 

A 0.2 µm positively charged sterile filter at the dispenser removes bacteria and endotoxins. It makes possible to produce pure water with an endotoxin value of <0.001 EU/ml without the need for any further investment in an expensive ultra filter. An uncharged 0.2 µm sterile filter is also available.

The LaboStar 4 system is a mobile bench device with an integrated tank which can be directly manually filled with feed water. LaboStar systems are delivered with the first set of modules and filters and are ready for use.

 
    Photos may vary from actual product

 Additional LaboStar Products available from Evoqua

              

LaboStar® Pro TWFLaboStar® 10 RO + RO DI

 LABOSTAR PRO System ADVANTAGES

  • Ultrapure water circulation right into the dispenser head
  • Easy to dispense water using the practical dispenser
  • Whisper operation mode
  • Rapid and simple disinfection
  • Whisper operation mode
  • Rapid and simple disinfection
  • Quality monitoring of ultrapure water
  • Pressure reducer included
  • Simple module exchange via quick-release connections
  • Protective jacket at the end of the sterile filter

 LABOSTAR PRO UV 4 System ADVANTAGES

  • 7 liter tank volume
  • Suitable for mobile use at different locations
  • Ultrapure water is ready for use within minutes after filling the tank  

 Specifications

Ultrapure water specificationsLaboStar PRO DI 2 System​LaboStar PRO UV 2 SystemLaboStar PRO UV ​4 System
Delivery flow rate

l/min

1,5*

1,5*

1,5*

​Conductivity

µS/cm

0,055

0,055

0,055

​Resistivity

MΩ-cm

18.2

18.2

18.2

​TOC

​ppb

5-10

1-5

1-5

​Bacteria

​cfu/ml 

<1**

<1**

<1**

​Endotoxins

​EU/ml

<0,001**

<0,001**

<0,001**

​Particles > 0.2 µm

​per ml

<1

<1

<1

​Feed water specifications

Feed water pPressure

bar

0.1-6

0.1-6

-

Initial conductivity

µS/cm

<20

<20

<20

Silt density index

SDI

<3

<3

<3

​TOCppb​​<50<50​​<50

Free Chlorine

mg/l​

<0.1

<0.1

<0.1

Total iron

mg/l​

<0.1

<0.1

<0.1

​CO2

mg/l​

<​15

<​15

<​15

​Water temperature

°C

5-35

5-35

5-35

​Room temperature

​°C

5-35

5-35

5-35

Energy requirements

​Power consumption

W

270

270

270

​Power supply

​v/Hz

100-240V / 50-60Hz

100-240V / 50-60Hz

100-240V / 50-60Hz

​Dimensions





​Height

​mm

535

535535

Width

mm

400

400

​400

​Depth

mm​410410520
​Shipping weight​kg​21​23​24
Item codeW3T324339W3T324340W3T324491

*  depending on booster pressure, min. 1.0 LPM > 0.1 bar input pressure
** Incl. charged sterile filter (the water was free of any detectable RNase or DNase)

 Consumables and accessories

 
 
Item Number ​Description ​Change Frequency
W3T197618 Pretreatment module VMD (systems without UV) 6 – 12 months
W3T197621 ​Pretreatment module DTO (systems
with UV)
6 – 12 months
W2T558521 UV replacement bulb 12 months